It is really silly that someone who takes as many photos as I do started a project without photos of the original condition. I can't believe that I did not take pictures before I started, I thought I had but cannot find them now. Oh well! Back in September of 2013, in a quest to find a light camera to replace my Sinar F for shooting 4x5 film outdoors, I purchased an old Graflex Crown Graphic, early 50's from the serial number list on Graflex.org. It was in really quite rugged shape but did not cost much $123 plus $12 in shipping at auction on Ebay. The lens has fungus and many cleaning scratches, the shutter sticks on slow speeds, the bellows leaks, looks like 5 holes in all at the corners and the leather the leather covering was shot. From what I can tell this camera was likely in a flood. As it came from down south it might have been a hurricane. Regardless this camera has been badly abused. The leather and paint was cracked and pealing especially on the front bed but really on the wood parts as well. But she is complete with all her parts and the working mechanisms seem to function fine. When I realized she was going to take a fair amount of work to make into a working camera again I decided to put her aside and I purchased a bargain price Graflex Super Graphic which is now all set up as a working camera with my glass from the Sinar.
So over the New Years holiday I started the job of figuring out what to do with her. I had come to the conclusion that I was not going to try to restore her. I just wasn't in the mood to buy leather and do the whole recovering thing and have seen some nice looking Graflex cameras with the leather removed. Since the leather on mine was in such bad shape I have decided to go that direction. Hard decision but I plan on exposing and refinishing her mahogany wood box. I plan on stripping the old paint off of the painted graphlock back and other metal parts and repainting them. Still not determined if I am going to paint or leave bare the drop bed. I have seen them both ways. I may put the view finder that mounts on top back on but may leave the rangefinder off for weight savings. Since I would likely use her as a handheld so I might be looking for a replacement lens and shutter that works. Plenty seem to exist and if I am patient I hope to not pay too much for. I can always use the 135mm I have on my Super Graphic Lens board. I think they are interchangeable.
The leather seems to be glued on with some kind of water soluble glue. so I have been soaking it and gently removing it with a sharp paint scraper being careful not to dig into the wood. It is coming off fairly easily. The glue on the metal parts is a bit tougher. More photos to follow.
 |
| Side view with leather coming off. Bellows has 5 holes at pointed corners, very common! |
 |
| Front View |
 |
| Side view - Leather handle brackets have been removed. Missing bed drop "button". |
 |
| View of Front Standard, Bellows on this side seems free of holes. |
No comments:
Post a Comment